FlyByWire Airbus A32nx Mod

• Please use the DEVELOPMENT version of the A32nx from FlyByWire.
• Ensure that the “FLY BY WIRE A320NX SUPPORT” toggle is blue in the ‘Aircraft’ tab in settings.
• Finding Settings: Navigate to the ‘Flight Info’ tab, click the gear in the top left hand corner.

• The A32NX mod will not be detected unless any of the following words are found in the aircraft title: FlyByWire, A320, FBW, FWB. Please edit your livery to include any of these words if you can so that the Echo detects the MOD is loaded.

The Class Echo autopilot has been highly customized to ensure that the A320 NX is properly supported. There are a few special considerations that have been made:

• MANAGED MODE: Highlighting the Altitude, Heading or Speed values and CLICKING the encoder button will turn them from manual mode (blue) to managed mode (orange). PRESS any of those buttons to regain manual mode.
• Vertical Speed: PRESSING the VS button will engage a vertical speed. Highlighting the vertical speed value and CLICKING the encoder will level off the aircraft
• PRESS MB / HG to switch between the barometric modes. CLICK the encoder button for 29.92 (STD) altimeter setting.

1. APU Master
2. APU Start
3. Terrain On ND
4. Emergency Lights
5. Seatbelt Signs
6. No Smoking Signs
7. AutoBrake Lo/Med/Max
8. Radar (INOP)
9. Wind Shear (INOP)
10. TCAS (INOP)
11. Nosewheel Steering / Anti-Skid
12. Ground Spoilers Arming
13. Parking Brake Engage / Disengage
14. Gear Handle

1. Commercial
2. Galy & Cab
3. Generator 1
4. APU Generator
5. BUS tie
6. External Power
7. Generator 2
8. Battery 1
9. Battery 2
10. ACESS feed

1. Engine 1 Pump
2. Electric Pump 1
3. Power Transfer Unit
4. Engine 2 Pump
5. Electric Pump 2
6. Left Tank Pumps 1 & 2
7. Center Tank Pump 1
8. Cross-Feed
9. Center Tank Pump 2
10. Right Tank Pumps 1 & 2

1. Lighting controls: Main Landing, Nose, Strobe, Beacon, Wing, Nav, Runway Turnoff
2. Icing Controls: Wing, Engine 1, Engine 2, Window
3. Brightness dial hotspots. Controls every brightness control for: Displays, Integrated Lighting, Flood Lighting, FD Display.

1. Air Conditioning Pack 1
2. Engine 1 Bleed
3. APU Bleed
4. Engine 2 Bleed
5. Air Conditioning Pack 2
6. ADIRS (Air Data Inertial Reference System)

1. Optional Data Display Pushbuttons (CSTR, VOR D, WPT, NDB, ARPT)
2. Mode Select Switch
3. Range Select Switch

1. Engine 1 / 2 – N1, N2, Oil Pressure, Oil Temperature, Throttle Position
2. Engine 1 / 2 Toggle on/of
3. Starter Switch Selector.